Top 10 Best Engine Leveler [2022]

Last Update:

You can trust our selection for Engine Leveler Reviews. Because We have worked hard studying and analyzing 47831 reviews for Engine Leveler and rating them. It was a difficult job to list only ten products for Engine Leveler where thousands of them available online. I hope it will help you to take final decision for Best Engine Leveler.

Best Engine Leveler

Comparison Chart for Best Engine Leveler

In this article we've included our suggestions for the Engine Leveler after analyzing 47831 reviews.

1Strongway Hydraulic Engine Hoist with Load Leveler - 2-Ton Capacity9.2Buy On Amazon
2Pit Pal Products 201 Engine Sling9Buy On Amazon
3Performance Tool W41030 3/4 Ton (1,500 lbs.) Capacity Engine Hoist Leveler9Buy On Amazon
4BIG RED T32100 Torin Engine Hoist Shop Crane Accessory: Steel 3 Position Engine Leveler with Adjustable Handle8.8Buy On Amazon
5OTC 1822 10, 000 lb. (5-Ton) Capacity Load Leveler for use with Engine Hoist/Floor Crane8.4Buy On Amazon
6Arcan 1500-lb. Capacity, Heavy Duty Engine Load Leveler (ALEL15)8.4Buy On Amazon
7Dragway Tools 2 Ton Load Leveler for Engine Hoist Shop Crane Cherry Picker Lift Hoist8.4Buy On Amazon
8Powerbuilt 640470 3/4-Ton Engine Leveler with Handle8.4Buy On Amazon
9VIVOHOME Heavy Duty Steel 2 Ton / 4000lbs Engine Hoist Load Leveler Shop Crane Cherry Picker with 2 Chains8.2Buy On Amazon
10OEMTOOLS 24831 3/4 Ton Engine Leveler8.2Buy On Amazon

Table Of Content:

1. Strongway Hydraulic Engine Hoist with Load Leveler – 2-Ton Capacity

  • Constructed of high-grade steel and built to exacting standards for quality and durability
  • Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust.
  • Paint is oil, grease and dirt-resistant for easy cleanup
  • High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to move the load, which helps to reduce wear and extend service life.
  • Piston-ram is treated and polished to resist skiving

2. Pit Pal Products 201 Engine Sling

  • Pit-Pal Products Engine Sling

3. Performance Tool W41030 3/4 Ton (1,500 lbs.) Capacity Engine Hoist Leveler

  • Drop forged steel construction
  • Heat treated chain and hooks
  • Fully adjustable with threaded rod and 3 position chain mount holes

4. BIG RED T32100 Torin Engine Hoist Shop Crane Accessory: Steel 3 Position Engine Leveler with Adjustable Handle

  • Engine leveler has a 3/4 ton (1,500 lb) load capacity and is made from rugged, top quality structural steel; It’s ideal for garage, workshop, and agricultural jobs.
  • Fully adjustable, with 3 position chain mount holes to accommodate various engine configurations
  • Features (4) 14″ length chains, each equipped with an L-bracket assembly
  • Simply attach the chains to the engine and use the crank handle for quick and ease adjustments with the threaded shaft, which balances the load with ease.

5. OTC 1822 10

  • OTC’s 10,000 pound capacity load leveler is designed to be used in conjunction with a crane or hoist to lift engines, transmissions, or other heavy components.
  • Unit allows tilting or leveling of the component as needed, to facilitate removal or installation, by turning the leveler’s drive screw with hand or pneumatic tools.
  • Spread is adjustable from as narrow as 36 inches to as wide as 56 inches; spreader bar adjustment is secured with locking bolts.
  • Includes two lengths of grade 80 chain with safety hooks attached to each
  • Backed by OTC’s Lifetime Marathon Warranty.

6. Arcan 1500-lb. Capacity

  • HEAVY DUTY: 1, 500 lb. working load capacity accommodates most engines.
  • SUPPORT CHAINS: Two chains at each end support the load and help to transfer the weight safely.
  • ONE HANDED CRANK: Allows you to easily reposition and redistribute the load.
  • ADJUSTMENT ROD: Acme threaded adjustment rod allows for easy adjustment of the load.
  • VERSATILE: Easily adapts to many engine hoist models to enhance their operation.
  • COMPLIES WITH ASME PASE-2014 SAFETY STANDARD: We put all our lifting equipment through voluntary and rigorous third party safety testing to ensure our products are among the safest in the market.

7. Dragway Tools 2 Ton Load Leveler for Engine Hoist Shop Crane Cherry Picker Lift Hoist

  • Easily install and remove an engine, transmission or shop equipment by yourself
  • Balance heavy awkward loads up to 4000 lbs
  • Simply crank the threaded shaft to balance the load
  • Measures 23in. (L) x 8in. (H) x 2in. (W) with handle
  • Works with engine hoists, shop cranes and cherry pickers.

8. Powerbuilt 640470 3/4-Ton Engine Leveler with Handle

  • For use with engine cranes
  • Balances or tilts engine/transmission for easier install/removal
  • Four point mounting system for maximum control
  • Precision four point mounting system gives you maximum control
  • Built-in swivel handle lets you adjust the tilt of the engine as you raise or lower it
  • For use with engine cranes
  • Balances or tilts engine/transmission for easier install/removal
  • Four point mounting system for maximum control
  • Worm shaft rotates using built-in swivel handle
  • Meets or exceeds ANSI standards

9. VIVOHOME Heavy Duty Steel 2 Ton / 4000lbs Engine Hoist Load Leveler Shop Crane Cherry Picker with 2 Chains

  • MECHANIC’S BEST FRIEND – The VIVOHOME Heavy-Duty Hoist Load Leveler allows for easy engine handling and positioning; It attaches between the engine block and the crane to let you lift the engine safely and easily; With this handy tool, reinsertion of motor and transmission will also be perfectly balanced.
  • HEAVY-DUTY MATERIALS – Made with high-quality steel that is highly resistant to wear and corrosion, it ensures safe operation and prolonged service life; The maximum lifting capacity of 4000 lbs.
  • EXCELLENT SUPPORT CHAINS – Designed to easily attach to the engine, 2 supporting chains offer added strength and allow for accommodating engines of different sizes; They help share the heavy load and keep the engine steady so that it won’t sway or fall off during the process.
  • CONVENIENT CRANK HANDLE – It comes with a fine-tuning crank handle that can be operated by one hand to adjust the horizontal tilt, making it easier to carry off-center loads; It mainly helps steady the engine and tilt it to slide in the transmission and engine mount.
  • MULTIPLE APPLICATIONS – This hoist load leveler can be applied to engine hoists, shop cranes and cherry pickers; An essential tool for mechanics or for those who work on vehicles; As the materials are tested to resist humidity, it can be used in both indoor and outdoor environments.

10. OEMTOOLS 24831 3/4 Ton Engine Leveler

  • 4 Point Mounting System Provides Maximum Control
  • 3 Chain Positions to Accommodate Different Engine Configurations
  • Durable Steel Construction
  • Smooth Operating Worm Drive Shaft for Easy Level Adjustment
  • Rated Capacity: 1,500 Lbs.

How To Choose The Best Engine Leveler

Does the thought of finding a great Engine Leveler stress you out? Has your mind been juggling between choices when it comes to buying Engine Leveler in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Engine Leveler for themselves. We understand the stress associated with the buying process!

Since you’re here, you are obviously curious about Engine Leveler. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.

There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.

But that’s not always easy, right? That's why we've taken time to compile a list of the best Engine Leveler in today's market, on your behalf, so that there will be no more worries for you.

How did we come up with the list, you ask? How did we create this buying guide?

  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Engine Leveler currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-

  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.

Top Engine Leveler brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.

  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Engine Leveler based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Engine Leveler before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Engine Leveler they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Engine Leveler, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Engine Leveler before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Engine Leveler will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Engine Leveler if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Engine Leveler on the market, the products that got mostly negative ratings get filtered and discarded.
These are the criteria we have chosen our Engine Leveler on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.

Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Engine Leveler featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a Reply

Your email address will not be published. Required fields are marked *