Our team studied on 45806 reviews available online for Filament Dryer, chose the finest ones and prepared Filament Dryer Reviews for you. It was very difficult to shortlist the ideal Filament Dryer from thousands of products online. However, We tried to make sure that you get only the Best Filament Dryer from our suggestions. Check our listings-:
Comparison Chart for Best Filament Dryer
In this article we've included our suggestions for the Filament Dryer after analyzing 45806 reviews.
|1||3D Printer Filament Dryer Box||9.8||Buy On Amazon|
|2||Upgraded Dry Box for 3D Filament Storages||9.6||Buy On Amazon|
|3||Upgraded 3D Printer Filament Dryer Box||9.6||Buy On Amazon|
|4||Upgraded Dryer Box of 3D Printer Filament||9.4||Buy On Amazon|
|5||JAYO 3D Printer Filament Dryer Box||9.4||Buy On Amazon|
|6||Sovol Filament Dryer, SH01 Filament Dehydrator 3D Printer Spool Holder||9||Buy On Amazon|
|7||EIBOS Filament Dryer Box||9||Buy On Amazon|
|8||Dry Box for 3D Filament Storages||8.2||Buy On Amazon|
|9||EIBOS Filament Dryer, 3D Printer Filament Dry Box with Fan||8.2||Buy On Amazon|
|10||3D Printer Filament Dryer Box||8.2||Buy On Amazon|
Table Of Content:
- 3D Printer Filament Dryer Box, Upgraded Comgrow 3D Filament Storage Box, Large-Capacity 3D Filament Box...
- Upgraded Dry Box for 3D Filament Storages, Dehydrator of Filament Dryer Box, SUNLU 3D Filament Enclosure...
- Upgraded 3D Printer Filament Dryer Box, SUNLU Filament Dehydrator Dry Box, Keep Filament Dry During 3D...
- Upgraded Dryer Box of 3D Printer Filament, SUNLU 3D Filament Dryer Box S1, Keeping Filaments Dry During...
- JAYO 3D Printer Filament Dryer Box,Printing Filament Dry Box for Filament Drying and Storage,Dehydrator...
- Sovol Filament Dryer, SH01 Filament Dehydrator 3D Printer Spool Holder, Dry Box for Keeping Filament Dry...
- EIBOS Filament Dryer Box, Filament for 3D Printer with Adjustable Timer, Temperature Humidity Control...
- Dry Box for 3D Filament Storages, JAYO Filament Dryer Box, Keeping Filaments Dry During 3D Printing, Compatible...
- EIBOS Filament Dryer, 3D Printer Filament Dry Box with Fan, Adjustable Timer & Temperature Humidity Control...
- 3D Printer Filament Dryer Box, Comgrow 3D Filament Storages, Keeping Filaments Dry During 3D Printing...
1. 3D Printer Filament Dryer Box
- Large Capacity】 Compared to other 3d filament dryers, our filament box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm.
- Heating & Drying Function】 The damp 3D printer filament leads to tension, clogging, poor adhesion and shifting of layers.
- Optimized Heating Method】 The filament dehydrator makes drying more efficient.
- Excellent Sealed Storage Box】 The silicone seal makes it possible to store the filaments for a long time without power and protects your filaments from moisture and dirt.
- User-friendly Design&1 Year Warranty】 2 inch large screen LCD monitor, can display the humidity, temperature in the filament storage box in real time.
2. Upgraded Dry Box for 3D Filament Storages
- Function – Dryer and Storage Box】SUNLU dry box is specifically made for the purpose of drying 3d printer filament, intended to remove moisture from a spool of filament.
- Heating, Rotating and Constant Temperature】The storages box will keep heating up to your preset temperature, and keep working until up to the preset time.
- Simple Yet Effective】The filament dryer box is pretty easy to use, it crams in a lot of functionality even with only two buttons, such as set temperature and time, load the data of the current temperature and the current target temperature.
- Set Temperature and Time】The dryer box is preset to run for 6 hours at 50℃ which should be compatible with pretty much any material any diameter of the filament.
- Quiet and Good Looking】The SUNLU filament dryer storage enclosure is very silent when it working, it can be used in your bedroom with your silence 3d printer and won’t be noisy to disturb you.
3. Upgraded 3D Printer Filament Dryer Box
- Keep dry, good printing effect】Dust-free, moisture-free.
- Fully assembled and easy to use】SUNLU dry box is simple to operate, turn on by hit either button, hold the left button to change the dry time, press the right button to change the temperature setting.
- Simple but Effective】The print quality will be better if using filament dried by SUNLU filament dehydrator box, surface smoother, layer adhesion increased.
- High Compatibility】The adjustable temperature(time) range is 35-55℃(0-24hours), SUNLU dryer box can bake most types of 1KG filament at a designated temperature for hours.
- Good After-Sales Service】After-Sales Service and Technical Support are provided.
4. Upgraded Dryer Box of 3D Printer Filament
- Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift.
- Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors.
- Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time.
- Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm.
- User-friendly Design&1 Year Guaranteed After-Sales Service】 A: The design of two rollers inside the box allows you to print while drying; B: 2 inch large screen LCD monitor, can display temperature and time clearly and brightly; C: Ultra quiet design, less than 10db while operating, no disturbing of your life and work; D: Exquisite packaging design- best gift: Come on to buy one to present to your friends who love 3D printing.
5. JAYO 3D Printer Filament Dryer Box
- JAYO Filament Dryer and Storage Box: JAYO 3D printer filament dryer dry filament, which helps you reduce the impact of the objective environment on the printing of 3D filaments, getting standard printing models of most filament, such as PLA, SILK, PETG, ABS filament, etc.
- Personalized Time and Temperature Setting: The default continuous drying time of the JAYO filament dryer is 6 hours at 50℃.
- User-friendly Design: JAYO dryer is made up of a transparent lid, a white bottom, a 2-inch LCD screen(display temperature and time), 2 built-in rotating shafts and two buttons (set temperature and time).
- Compatible with most 3D Filament Spools: Most widely used filament often requires 3-6 hours of drying to achieve a good printing experience and the JAYO printer filament dry box is compatible with 1 kg filament materials at the diameter of consumables line:1.
- Partner for 3D Printer Filament: JAYO filament dryer box keeps heating up to your preset temperature and works until up to the preset time with the quiet design of less than 10dB.
6. Sovol Filament Dryer
- Remove Excess Moisture】3D printer filaments are hygroscopic, moisture would cause printing failure.
- Real-time Monitoring of Temp and Humidity inside】Displays the humidity and temperature in the dry box in real time.
- Excellent Power-off Drying Mode】Silicone & PTFE seal makes it possible to store filaments for a long time without power and protects your filaments from moisture and dirt.
- Large Capacity】 Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm.
- Heating More Evenly】 The unique design of the built-in fan in the box is based on the principle of modynamics of air, makes the filament heated more evenly.
7. EIBOS Filament Dryer Box
- DRYING & PRINTING AT SAME TIME】: Filament dryer box drys the wet or brittle 3d printer filament, No plastic strings and clogging, even make filament better than the brand new unit.
- COMPATIBLE WITH MULTIPLE SPOOLS】: It can use 4 rolls of 0.
- ADUSTABLE TEMPERATURE HUMIDITY 】: Independent Temperature detector, The default time is 6hrs, while you can also reset from 0-24hrs，The temperature set can up to 70°c; Independent humidity detector with digital display, the measuring range is from 10%to 99%.
- 150W PTC HEATER】: In the filament dryer, we use a 150w PTC heater to heat up, which can dry evenly space.
- Chrpauul’S After-Sales Service】: CYCLOPES have CE, FCC ，ROHS、REACH CERTIFICATES, your satisfaction is our greatest pursuit.
8. Dry Box for 3D Filament Storages
- 3D FILAMENT DRYER AND STORAGE】Dry Box is designed to keep filament dry and dehumidify various kind of filaments, Heating during the printing Provide a dry storage environment for 3D printer filament.
- 24 HOURS KEEP FILAMENT DRY】The large-area heating block can ensure that the contact area between the filament and the filament is continuously rotated in the dry hot box to remove water.
- EASY TO USE】The filament drying oven has a 2-inch LCD screen and only two buttons (set temperature and time), the default oven drying time is 6 hours, short press the left button to reduce the drying time.
- MAXIMUM CAPACITY】Support the maximum capacity: Φ210*85(H)mm, and the diameter of consumables line: 1.
- AVOID INTERRUPTION】 Drying box has a quiet sound even when running, and can be used with various FDM printers.
9. EIBOS Filament Dryer
- DRYER & STORAGE BOX】the dryer box is specifically made for the purpose of drying 3D printer filament, intended to remove the moisture from a spool of filament caused by ambient exposing.
- ADJUSTABLE TEMPERATURE & HUMIDITY MONITOR】adjustable heating temperature to accommodate needs of various filaments, actual and setting temp are displayed on the LCD indicator.
- COMPATIBLE WITH MULTIPLE SPOOLS】works for different filament types and diameters, compatible with 1.
- REVIVE YOUR BRITTLE FILAMENT】filament dryer box aims at drying the wet or brittle 3D printer filament, or even make it better than the brand new unit.
- 150W PTC HEATER & BUILT-IN FAN】different from applying ordinary heater 48W PI heating pad to heat up space, our product use 150W PTC heater which is more durable, energy-saver, and environmentally friendly, makes filament drying more evenly.
10. 3D Printer Filament Dryer Box
- Filament Dryer and Remove Moisture: Comgrow Dry Box is designed to keep filament dry and remove moisture from kinds of filaments.
- Real-time monitoring of temperature and humidity: Adjustable temperature range 40°~ 50 °C, setting time from 6 hours to 12 hours.
- Large storage volume: Comgrow dryer box can store 2 rolls of filaments with a width of less than 70mm at the same time or 1 roll of filaments with a width of less than 150mm.
- Great sealed filament box: The outlet structure adopts a silicone cable sheath and Teflon tube, the outlet is smooth and can be covered with a plug when not in use.
- After-Sales Service: If you have any unsolvable problems about COMGROW filament dryer box, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
Filament Dryer Buying GuideDoes the thought of finding a great Filament Dryer stress you out? Has your mind been juggling between choices when it comes to buying Filament Dryer in general, specifically regarding which model to choose?If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Filament Dryer for themselves. We understand the stress associated with the buying process!Since you’re here, you are obviously curious about Filament Dryer Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.But that’s not always easy, right? That's why we've taken time to compile a list of the best Filament Dryer in today's market, on your behalf, so that there will be no more worries for you.How did we come up with the list, you ask? How did we create this buying guide?
- First, our algorithms collected as much information available about these products from trusted sources.
- We employed both Artificial Intelligence and large data volume to validate all collected information.
- Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Filament Dryer currently on the market!
- Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
- Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Filament Dryer based on that.
- Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
- Customer Ratings: The hundreds of customers using the Filament Dryer before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
- Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Filament Dryer they used.
- Seller Rank: Now, this is interesting! You don’t just need a good Filament Dryer, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
- Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Filament Dryer before putting them on the list.
- Durability: Durability and reliability go hand to hand. A robust and durable Filament Dryer will serve you for months and years to come.
- Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Filament Dryer if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
- Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Filament Dryer on the market, the products that got mostly negative ratings get filtered and discarded.